Miller® Millermatic® 140 MIG Welder 115 Volt, 1 Phase, 60 Hz With M-10 MIG Gun And 10' Leads

MIG Welders

Printer-Friendly Page

1 Products


> All Categories > Welding Products > Welders & Accessories > MIG Welders
Miller® Millermatic® 140 MIG Welder 115 Volt, 1 Phase, 60 Hz With M-10 MIG Gun And 10' Leads

Enlarge Image

Millermatic® 140 is an all-in-one wire welding package with a welding range of 24 gauge through 3/16" mild steel.

Add to Current Order

Overview

Pricing:

Part Number:	Price:	Extended Price:
MIL907311	~~Reg. Price: $798.000~~ Web Price: $658.814	$658.814
	Min Purchase Qty:
	1 Unit

Features:

Smooth-Start™ patent-pending technology provides a smooth, spatterfree start. It’s the best-starting machine in the small MIG machine category. No pop gun starts and no spatter to clean up.
Infinite Voltage Control with Manual On/Off Wire Feed Speed Tracking provides a broader operating range with finer control by automatically increasing or decreasing wire feed speed when voltage is adjusted (unit shipped with wire feed speed tracking set to “off”).
Durable cast aluminum feedhead incorporates dual groove quick-change drive rolls and spring-loaded tension arm with calibrated tension knob all designed to make set up easier and faster.
Thermal overload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
Miller’s exclusive "Tip Saver" short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at torch rather than unit.
Self-resetting motor protection circuit eliminates the need to find and replace fuses.
Easy access to output studs provides convenient polarity changeover when changing from solid or flux cored wires.
Semiautomatic constant voltage wire welding package is capable of welding 24 gauge - 3/16 in (0.8 - 4.8 mm) mild steel.
Standard built-in solid state contactor circuit makes wire electrically "cold" until trigger is pulled. Makes the unit safer, and is easier to position torch to work before starting to weld.
Uses 4 or 8 in spools and can be set up to weld with wire sizes .024 - .030 in mild/stainless steel and .030 -.035 in flux cored.

Application:

Light Fabrication
Maintenance and Repair
Auto Body
Farm and Ranch

Includes:

Power source
6' power cord and plug
10 ft M-10 MIG gun and cable assembly
10' Work cable and clamp
Smith® Argon and AR/CO2 mix regulator/flow gauge with hose
Spool of Hobart® .024" solid wire
Two contact tips for .024" wire
Two contact tips for .030" wire
Dual groove quick-change drive roll for .024" or .030/.035" wire
Factory-installed contactor and gas solenoid valve
Set-up and operation video
Information/settings chart
Material Thickness Gauge

Specs:

Process: MIG (GMAW)	Input AC Voltage: 115V
Phase: Single Phase	Output DC Amps [max]: 90
Duty Cycle: 20%	Polarity: DC
Weight: 60 lb

Clear Checkboxes

Compare

Buy Selected

Current Item:

Select	Part Number	Product Description	Unit Price	UOM	Min Qty
	MIL907311	Miller® Millermatic® 140 MIG Welder 115 Volt, 1 Phase, 60 Hz With M-10 MIG Gun And 10' Leads	$658.814	Each	1

Accessories:

Part Number	Product Description	Unit Price	UOM	Min Qty
MIL770187	Miller® Running Gear/Cylinder Rack	$152.000	Each	1
MIL194776	**Miller® Running Gear Cylinder Rack, Small	Call for Price	Each	1
MIL195149	Miller® Protective Cover For Millermatic® 135 And 175	$40.297	Each	1

Related Products:

Select	Part Number	Product Description	Unit Price	UOM	Min Qty
	MIL907311011	Miller® Millermatic® 140 MIG Welder 115 Volt, 1 Phase, 60 Hz With M-10 MIG Gun, 10' Leads And Small Running Gear Cylinder Rack	$726.512	Each	1
	MIL907311012	Miller® Millermatic® 140 MIG Welder 115 Volt, 1 Phase, 60 Hz With M-10 MIG Gun And 10' Leads	Call for Price	Each	1

Other Suggestions:

Select	Part Number	Product Description	Unit Price	UOM	Min Qty
	MIL907335	Miller® Millermatic® 140 With Auto-Set™ MIG Welder 115 Volt, 1 Phase, 60 Hz With M-10 MIG Gun And 10' Lead	$649.000	Each	1
	MIL907312	Miller® Millermatic® 180 MIG Welder 230 Volt, 1 Phase, 60 Hz With M-10 MIG Gun And 10' Lead	$789.000	Each	1

Clear Checkboxes

Compare

Buy Selected

Corporate Information			Customer Service			Catalogs

	Careers About Airgas News	Investor Information Services Markets		Site Locator Contacts Terms and Conditions	Privacy Statement Website Help Open an Account		Medical & Healthcare Metal Fabrication Site Map	Specialty Gases Workplace Safety Product Reference